| Ride Technology | 1 | 2 | 3 | 4 | 5 | 6 |
|
SHOCKWAVE…9000 |
Available in 3 lengths: |
Collapsed Length |
Ride Height |
Extended Length |
Stroke |
10.66" |
13" |
14.76" |
4.1" |
12" |
15" |
17" |
5" |
13.5" |
18" |
19.5" |
6" |
|
|
Load capacity:
5" diameter SKW9000 series = 1200 lbs. @ 100 psi
|
| |
| |
|
 |
 |
| |
Call Now! for the best deals on this item..... |
|
| |
| |
SHOCKWAVE 1000 v3.0 |
Available in 3 lengths: |
Collapsed Length |
Ride Height |
Extended Length |
Stroke |
9.19" |
10.75" |
11.79" |
2.6" |
10.65" |
13" |
14.76" |
4.1" |
12" |
15" |
17" |
5" |
|
|
Diameter and load capacity:
6.5" diameter SKW1000 series = 2140 lbs. @ 100 psi
8.0" diameter SKW2000 series = 3150 lbs. @ 100 psi
|
| |
Our latest refinement of the original ShockWave™. It is typically used in an independent front suspension application. It can also be used in some independent rear suspension applications. The ShockWave™ v3.0 uses a double convoluted airspring bellow to achieve the load capacity required for these installations. |
| |
Recommended Applications: IFS and/or IRS installations on vehicles weighing 1500-2500 lbs. per axle. NOT recommended for solid axle rear applications..not enough travel, too much load capacity. |
|
|
| |
SHOCKWAVE 7000 |
The 7000 series was developed in 2003 to address lighter weight vehicles with confined space for installation. Its 4" diameter allows placement in a smaller space. The softer spring rate and load capacity offer an even better ride for lighter weight vehicles. |
| |
Recommended Applications: Solid rear axle installations on vehicles weighing 1500 lbs. or less on the rear axle. Also as a supplement to a leafspring rear suspension. NOT recommended for IRS or IFS installations...not enough load capacity. |
|
 |
| |
|
SHOCKWAVE 8000 |
The 8000 series was introduced in 2000 to accommodate the customers who wanted ShockWaves™ for the rear of their vehicle as well as the front. The key difference of the ShockWave 9000™ is the tapered sleeve airspring bellows. This allows a softer spring rate, longer travel, and a lower load capacity that is more appropriate for a rear installation. |
| |
Recommended Applications: Rear installations on a solid rear axle where rear vehicle weight is 1500-2400 lbs. IRS installations on vehicles weighing 1500 lbs. or less per axle. Not recommended for IFS installations...not enough load capacity. |
|
 |
| |
|
| |
|
 |
|
Pre-Engineered Car Systems
- Proven to fit
- No guesswork
- Bolt-on installation in nearly all applications
We have done the work of engineering a purpose built ShockWave™ Solution for the vehicles listed below. These are not the only cars the ShockWave™ Product is compatible with, but they are some of the more popular applications.
|
Options to meet your needs |
We provide ShockWave™ systems with or without other accompanying suspension components to fit your needs. Air Ride Technologies StrongArm™ tubular control arms and other suspension components are engineered to provide optimum performance and ride quality from ShockWave™ Components. In a few cases they are required for proper fit of the ShockWave™ unit. |
| |
FOR ALL YOUR
AIR PRODUCTS
WE ARE THE
SUSPENSION
SPECIALISTS
CALL TODAY
FOR THE
BEST PRICES
IN AUSTRALIA.
YOU WANT QUALITY
WE'VE GOT IT
ALL HERE. |
|
 |
Front ShockWave™ |
 |
Front ShockWave™ with lower StrongArm™ |
 |
Front ShockWave™ with Upper & Lower StrongArms™ |
| REAR SYSTEMS EXAMPLES |
 |
Rear ShockWave™ |
 |
Rear ShockWave™ with mount bracket |
 |
Rear ShockWave™ with StrongArms™ |
|
